Sanyo DSR-M810 User Manual
Page 42
6
RS-485/NETWORK SET
English
41
[Settings] ( indicates default setting.)
3
Press the [
] and [
] buttons to select
the desired item, then press the [
]
button.
4
Press the [
] and [
] buttons to
change the setting, then press the
[
] button.
5
Use the same procedure to set the other
items as needed.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Use the following procedure to specify whether or not
recording is to be stopped when the [REC] button on the
separately-sold VA-RMN01 wired remote controller is
pressed. When a setting of “ENABLE” has been made, the
remote controller's [REC] button can be pressed for 2
seconds or longer to stop recording.
z
Regardless of this setting, if the [REC] button is pressed
and released quickly (i.e., within 2 seconds), recording
will be started.
1
Press the [MENU] button.
The MENU indicator lights up and the
screen appears.
Select “6.RS-485/NETWORK/REMOTE SET” and press
the [
] button.
The
appears.
2
Press the [
] and [
] buttons to select
“REC STOP” and press the [
]
button.
“DISABLE” flashes.
3
Press the [
] and [
] buttons to
change the setting, then press the
[
] button.
[Settings] (
indicates initial setting.)
4
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Item
Setting
Description
(1)
REMOTE AS
VCR
When the digital video recorder is operated
from a controller, sets it to operate as a
VCR.
DVR
When the digital video recorder is operated
from a controller, sets it to operate as a
digital video recorder.
(2)
DATA SPEED
Used to select the communication speed.
Selections: 19200/2400/4800/9600
(3)
STATUS INFO
ON
Status information is sent.
OFF
Status information is not sent.
(4)
ALARM INFO
ON
Alarm information is sent.
OFF
Alarm information is not sent.
(5)
ADDRESS*
Set the digital video recorder’s address
when using RS-485.
Setting range: 000 to 127
Setting REMOTE SET
Setting
Description
DISABLE
Recording will not be stopped when the remote
controller’s [REC] button is pressed.
ENABLE
Recording will be stopped when the remote
controller’s [REC] button is pressed for at least
2 seconds.
e00_l8hae_us_7.book Page 41 Thursday, April 8, 2004 11:14 AM