Samsung 29Z6 - Manual (Page 23)

23
◆ Scan mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digital and
Progressive
modes are available.
◆ Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
◆ Tilt
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting.
◆ LNA
This feature is very useful in the situation that the TV is used
in a weak signal and amplifies the TV signal in the weak
signal area, but not noise.
This feature is working only in a weak signal condition, and
that is memorized on current channel, additional.
1 Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the - or + button.
3 Select the required option (Scan mode, Digital NR, Tilt or
LNA
) by pressing the or button.
4 Press the - or + button to change the setting.
◆ Scan mode : Natural, Digital or Progressive
◆ Digital NR : Off or On (activating)
◆ Tilt : -7 to +7
◆ LNA : Off or On (activating)
Extra Picture Settings
ENG
Select Adjust Exit
Picture
Mode
➛➛ Dynamic ❿❿
Adjust
❿❿
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode ➛➛ Dynamic ❿❿
Adjust
❿❿
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode
➛➛ Dynamic ❿❿
Adjust ❿❿
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode
➛➛ Dynamic ❿❿
Adjust
❿❿
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off