beautypg.com

Sanyo DSU21B User Manual

Page 24

background image

EN-22

How to operate

1.

Press the Menu button on the control panel or the MENU button on the remote control to
open the OSD menu.

2.

When OSD is displayed, use S / T to select any feature in the main menu.

3.

After selecting the desired main menu feature, press X to enter sub-menu for feature setting.

4.

Adjust the settings with W / X.

5.

Press the Menu button on the control panel or the MENU button on the remote control, the
screen will return to the main menu.

6.

To exit OSD,

Press the Menu button on the control panel or the MENU button on the remote control

again. The OSD menu will close and the projector will automatically save the new settings.

Picture (Computer / Video Mode)

Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Color Setting
Adjust the color temperature. At higher temperature the screen looks
colder; at lower temperature, the screen looks warmer. If you select
“User”, “Red”, “Green” and “Blue” can be adjusted.
Keystone
Correct the keystone distortion.

Aspect Ratio (Computer Mode)
Select how the picture fits on the screen:

„

1:1 : If input source is bigger than DMD output resolution,

it will full all the whole screen and ignore the aspect
ratio.

800 x 600

Computer Mode

Video Mode

This manual is related to the following products: