Sony STR-DH100 - Manual (Page 20)

20 GB
Navigating through
menus
By using the amplifier menus, you can make
various adjustments to customize the receiver.
1
Press AMP MENU.
“BALANCE” appears on the display.
2
Press or b to enter the
parameter.
3
Press V/v repeatedly to select
the setting you want.
The setting is entered automatically.
To return to the previous display
Press B.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear
dimmed on the display. This means that they
are either unavailable or fixed and
unchangeable.
x BALANCE (Speaker balance)
Lets you adjust the balance between left and
right speakers.
You can adjust from BAL. L+10 to BAL.
R+10 in 1 step.
The initial setting is BAL. 0.
x NAME IN (Naming)
Lets you set the name of inputs and preset
stations. For details, see “Naming inputs”
(page 19) and see “Naming preset stations”
(page 24).
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps:
0% dim, 40% dim, 70% dim
The initial setting is 0% dim.
Tip
You can also press DIMMER repeatedly on the
receiver to adjust the brightness of the display.
Amplifier Operations
7 8
0/10 ENTER
9
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET + REPLAY ADVANCE
MEMORY AMP MENU
CLEAR
DISPLAY MUTING
MASTER VOL
TV VOL
D.TUNING
-
. < < >
>10/
TOOLS/
OPTIONS
MENU/HOME
,
V/v/B/b
AMP
MENU
Overview of the setup
parameters