Samsung Digimax U-CA 3 - Manual (Page 71)

71
Quick view
If you enable Quick View before capturing an image, you can view the image you just captured
on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with
still images.
Setting Quick View
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The quick view function can’t be activated.
[1 ~ 5 SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
SETUP
LCD
VIDEO
Q.VIEW
DEL.ANS.
ON
OFF
BACK: SET:OK
SETUP
LCD
VIDEO
Q.VIEW
OFF
BACK: SET:OK
DELETE?
D DE EL L::O OK K
C CA AN NC CE EL L::
Deleting Images in Quick View
You can delete images directly from the quick view screen.
If you select the [1~5SEC] sub menu at step 4, press the
RIGHT button and the [DEL. ANS.] menu will be displayed.
5. Select the desired [DEL. ANS.] sub menu by pressing the
UP/DOWN button.
Selecting [OFF] : A [DELETE?] message will not display.
Selecting [ON]
: You can delete the captured image at
once.
6. Press the menu button twice and the menu will disappear.
Using the [DEL.ANS.] menu
If you select [ON] at the [DEL.ANS.] menu, a message as
shown alongside will be displayed after taking a picture.
Pressing the OK button
: the captured image is deleted.
Pressing the LEFT button : the captured image is stored.