Samsung Digimax U-CA 3 - Manual (Page 104)

104
DigiStudio Installation guide
Cautions on the Graphic Card (VGA)
The DigiStudio software will not install on a PO with a graphic card that does not support 3D
acceleration and that has less than 8 MB video RAM. If the graphic card error screen appears
while using DigiStudio, please go through the following steps:
Depending on your graphics card, 3D avatars may not be supported.
Step 1 : Go to My Computer Control Panel Display Settings, check the display type
and color palette settings.
Step 2 : Set the color palette to High Color (16 bit) or True Color (32 bit).
For Voodoo3 or Savage4, set the color palette to High Color (16 bit).
Step 3 : The following graphic cards do not support 3D acceleration and cannot be used with
DigiStudio:
(1)ATI 3D (Charger /Pro Turbo /Xpression)/All in wonder pro
(2)ATI Rage ( /iic)/Rage 3D(LT Pro /Pro)/Xpert (98 /@play)
(3)nVidia Riva 128
(4)3dfx Voodoo 2
(5)SiS (6215A0 /6125B0 /6215C /5598 /530 /620 /540)
(6)Intel i740 graphics chip
(7)Hercules Terminator Beast
(8)Trident 3D /Blade /CyberBlade
(9)Diamond Multimedia FireGL 1000 Pro
(10)Number 9 SR9
Step 4 : If the display type is set to Standard PCI Graphic
Adapter (VGA), refer to the graphic card error
screen and install the latest graphic card driver.
Graphic Card Error Screen