Smarthome SUPERVISED WIRELESS SECURITY CONSOLE PS561 - Manual (Page 20)

TURNING LIGHTS ON AND
OFF REMOTELY
HT544/KF574 Remote Control
Press [LIGHT ON] or [LIGHT OFF]
on the Remote Control to turn on or
off lights connected to X-10 Modules
which you set to the same Housecode
AND Unit Code as the Console.
Note: This button is not an ALL lights
on button. It only turns on modules set
to the same Housecode AND Unit
Code as the Console.
RT504 Remote Control
The RT504 provides independent con-
trol of up to 16 modules which you set
to different Unit Codes. It transmits
signals to the supervised security sys-
tem’s Console which then re-transmits
the signals to other modules over your
house wiring. You can even dim and
brighten lights connected to Lamp
Modules and Wall Switch Modules.
The RT504 does not require any “in-
stallation.” Just fit four AAA alkaline
batteries in its battery compartment
and set its Housecode dial to match
the Console - it's ready to use.
6
4
6
6
6
RT504
Note: If you already own the RC5000
wireless transmitter and transceiver
(RT504 + RR501). set the RR501 and
the PS561 to the same Housecode.
SH624 Remote Control
The SH624 Remote Control combines
the features of the HT544 and the
RT504. It allows you to Arm and dis-
arm the system in HOME and AWAY
modes (see page 17 for details). It has
SECURITY LIGHT ON and OFF but-
tons which work like the [LIGHT ON]
and [LIGHT OFF] buttons on the
HT544 and KF574. It also lets you
control up to four additional X-10
Modules and dim and brighten lights
tool
controls mod-
ules set to same
House Code
and Unit Code
as console
SH624
Controls mod-
ules set to same
House Code as
Console and
unit codes 14
Dims and
brightens
lights
Press to turn
modules ON
and OFF.
Then press to dim
or brighten light.
Select to control modules set
to Unit Codes l-8 or 9-16.
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com