Woodstock W1666 - Manual (Page 25)

-25-
PARTS
W1666, W1685 Dust Collectors
Accessories
Quick Disconnect (Model W1038)
This is the perfect accessory for those who will use the
dust collector for multiple machines. The quick discon-
nect is designed to attach to a 4" hose and press-on to
any 4" diameter dust port. The quick disconnect works
with a friction fit to eliminate constant tightening/loosen-
ing hose clamps.
Universal Adapter (Model W1039)
Providing options for seven different sizes, this univer-
sal adapter allows you to connect your dust collector to
machines with dust ports smaller than 4". This is a "must-
have" for miter saws or when connecting your dust collec-
tor to common vacuum hoses.
Remote Switch (Model D3038 110V or Model
D3346 220V)
Turn your dust collector ON or OFF from up to 75 feet
away. The Model D3038 remote switch controls 110V-
20A dust collectors up to 1 1 /
2
HP, and the Model D3346
remote switch controls 220V-20A dust collectors up to 3
HP.
Grounding Kit (Model W1053)
All dust collectors generate static electricity in the duct-
ing system. If a series of conditions are in place, and the
dust collection ducting is not grounded, a spark from
static electricity buildup could ignite the fine wood dust
particles in the dust collector. To reduce this ignition haz-
ard, install a grounding kit.
Deluxe Ceiling Mounted Air Cleaner (Model
W1690)
Air cleaners are a great solution for removing airborne
dust particles. This air cleaner has three speeds (556,
702, and 1,044 CFM) and a primary and secondary filter
to remove dust particles as small as 2.5 Micron. Install
this air cleaner on a work bench, on a wall, or suspend it
from your shop ceiling.
Below are some of the accessories that work well with this dust collector. If you do not have a dealer
in your area, these products are also available through online dealers. Please call or e-mail Woodstock
International Inc. Customer Service to get a current listing of dealers at: (800)-840-8420 or at
[email protected].