Woodstock W1666 - Manual (Page 16)

-16-
SETUP
W1666, W1685 Dust Collectors
Figure 19. Fabric loop in upper support
hook.
Figure 18. Latch clamp with toggle.
Dust Bags and Inlet Y
To install the dust bags and the inlet Y, do these
steps:
1. Find the opening in the rim of both bags and insert
the band clamps into the rim of the bags until they
come out of the other side (see Figure 18).
2. Hang the upper bag as shown in Figure 19.
NOTE: The upper bag has the SHOP FOX ® logo on it
and the lower bag is plain.
3. Position the rim of the upper bag onto the collector
and latch the band clamp closed.
4. Position the rim of the lower bag onto the collector
and latch the band clamp closed.
5. Position the inlet Y on the impeller housing inlet,
and fasten it in place with the Phillips head screw
(see Figure 20).
Two dust collection bags are included with your new
SHOP FOX
® Dust Collector. There is a top and a bot-
tom bag. The top is distinguished by a SHOP FOX ® logo.
Both bags are secured with band clamps. For increased
filtration, optional 0.3 micron dust collector bags are
available through your dealer.
Figure 20. Securing inlet with screw.