Using the bodypack transmitter, Switching the transmitter on/off, Muting the transmitter – Sennheiser LV308 User Manual

Page 35: Operation and battery status indication

SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters

Using the bodypack transmitter

Switching the transmitter on/off

The transmitter can only be switched off when the standard display
is shown on the display panel. When in the operating menu, briefly
pressing the

OFF

button will cancel your entry (ESC function)

and return you to the standard display with the last stored settings.

Note:

Remove the batteries or the rechargeable battery when the
transmitter will not be used for extended periods of time.

Press the two unlocking buttons

and open the battery com-

partment cover

Press the

OFF

button

to switch the transmitter on. The red

LED

lights up.

To switch the transmitter off, press the

OFF

button

until

“OFF” appears on the display. The red LED

goes off.

Close the battery compartment. The battery compartment cover

locks into place with an audible click.

Muting the transmitter

The transmitter has a

MUTE

switch that noiselessly mutes the

transmitter’s audio signal without switching the transmitter off.

Set the

MUTE

switch

to the position ’MUTE’. The “MUTE” dis-

play appears on the display panel.

Set the

MUTE

switch

back to the original position to retrans-

mit the audio signal.

Operation and battery status indication

The red LED (LOW BAT/ON)

ᕣ

provides information on the current

operating state of the transmitter:

Red LED lit up: The transmitter is switched on and the capacity of
the batteries/BA 2015 rechargeable battery is sufficient.

Red LED flashing:The batteries are/the BA 2015 rechargeable bat-
tery is going flat (LOW BAT)!