beautypg.com

Using the "further programme preset" function, Menu system – Sony Grand Wega KF-50SX100K User Manual

Page 17

background image

18

Menu System

Menu System

With this feature you can:

a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture).

b) Individually adjust the volume level of each channel.

c) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture

reception if the picture is distorted.

d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way

a connected VCR records the unscrambled signal.

Using the "Further Programme Preset" function

1

Press the MENU button on the remote control to display the menu
on the screen.

2

Push the joystick to $ to select the

symbol, then push to z to

enter the Set Up menu.

3

Push the joystick to $ or 4 to select Manual Set Up then push to z
to enter.

4

Push the joystick to $ or 4 to select Further Programme Preset,
then push to z.

5

Push the joystick to $ or 4 to select the relevant programme
number, then push to z repeatedly to select:

a) ATT (RF attenuator)

b) VOL (Volume Offset)

c) AFT (Automatic Fine Tuning) or

d) DECODER

The selected item changes colour.

6

a) ATT
Push the joystick to $ to select On, then press the OK button.
Repeat steps 5 and 6 a) to attenuate other channels.

b) VOL
Push the joystick to $ or 4 to adjust the volume level of the channel
over a range of -7 to +7, then press the OK button. Repeat steps 5
and 6b) to adjust the volume level of the other channels.

c) AFT
Push the joystick to $ or 4 to fine tune the channel frequency over
a range of -15 to +15, then press the OK button. Repeat steps 5 and
6c) if you wish to fine tune other channels.

d) DECODER
Push the joystick to $ or 4 to select AV1 (for a decoder connected
to the Scart :1/

) or AV2 (for a decoder connected to the Scart

:2/q 2 (SMARTLINK)), then press the OK button.
Repeat steps 5 and 6d) to select the AV1 or AV2 output for other
programme positions.

The picture from the decoder connected to the Scart connector
:1/

or :2/q 2 (SMARTLINK) on the back of the

set will appear on this programme number.

7

Press the MENU button to exit and return to the normal TV screen.

The set is now ready for use.

S

RM 903

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

TV

VIDEO

Picture Adjustment

Select:

Enter Menu:

Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Reduction
Colour Tone

Personal

On

Off

Normal

Set Up

Auto Tuning
Programme Sorting

Select NexTView

AV Preset
Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning
Programme Sorting

Select NexTView

AV Preset
Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select:

Enter:

Language/Country
Manual Programme Preset
Further Programme Preset

RGB Set Up

Personal ID
Demo

- - - - - - -

Further Programme Preset

Select:

Enter:

PROG

AFT

VOL

ATT

DECODER

On
On
On

Off
Off
Off

0
0
0

Off
Off
Off

1

2

3
4
5
6
7
8
9
10
11

PROG

AFT

VOL

ATT

DECODER

1

Off

On

PROG

AFT

VOL

ATT

DECODER

1

On

-5

2

PROG

AFT

VOL

ATT

DECODER

1

On

-5

2

Off

AV1

AV2

PROG

AFT

VOL

ATT

DECODER

1

On

- 5

This manual is related to the following products: