The image on a monitor is composed of red, green and blue dots.
The closer the dots, the higher the resolution. The distance be-
tween two dots of the same color is called the 'Dot Pitch'. Unit:
mm

Vertical Frequency

The screen must be redrawn several times per second in order to
create and display an image for the user. The frequency of this
repetition per second is called the Vertical Frequency or Refresh
Rate. Unit: Hz

Example: If the same light repeats itself 60 times per second, this
is regarded as 60 Hz.

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge
of the screen horizontally is called the Horizontal Cycle. The in-
verse number of the Horizontal Cycle is called Horizontal Fre-
quency. Unit: kHz

Interlace and Non-Interlace
Methods

Showing the horizontal lines of the screen from the top to the bot-
tom sequentially is called the Non-Interlace method while show-
ing odd lines and then even lines in turn is called the Interlace
method. The Non-Interlace method is used for the majority of
monitors to ensure a clear image. The Interlace method is the same
as that used in TVs.

Plug & Play

This is a function that provides the best quality screen for the user
by allowing the computer and the monitor to exchange informa-
tion automatically. This monitor follows the international standard
VESA DDC for the Plug & Play function.

Appendix

This manual is related to the following products:

LS20CMZKFV-ZA LS17CMNSFLZD LS24CMKKFVE-ZA LS17CMNSFUZM LS23CMZKFV-ZA LS19CMYKF-ZA LS17CMNSFUSM LS22CMZKFV-ZA LS22CMKKFV-ZA LS24CMKKFV-ZA LS20CMZKFVE-ZA LS17CMNSFMZD