Inserting a minidisc, Pr ep ar at ion – Sharp MD-MT90 User Manual
Page 9
00/12/26 90SEC_09_11.fm
9
Pr
ep
ar
at
ion
-I
nser
ti
ng a
MiniD
isc-
Inserting a MiniDisc
Notes:
z
Do not place the MiniDisc under the holder.
z
If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
z
The lid cannot be opened if "TOC" is displayed.
Refer to the instruction on page 13.
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.