Us efu l fe at ur es – Sharp MD-MT90 User Manual
Page 27
00/12/26 90SEC_16_30.fm
27
U
s
efu
l Fe
at
ur
es
-Chec
k
ing Displa
ys-
„
To display the playing time of an indi-
vidual track
„
Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown by the
battery indicator (
) during operation.
z
When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z
When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
z
If you use the battery which you stopped charging
halfway, "
" may appear. It does not mean that the
battery is completely charged.
z
The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
z
When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
1
While in the stop mode, press the
or
button to display the track number and
track name.
2
Press the DISP button to display the play-
ing time for that track.
Each time the
or
button is pressed, the playing
time of the previous or next track will be displayed.