Sony HT-SL40 - Manual (Page 41)

41 GB
Additional Information
HT-SL55 4-247-583-12(1) GB
Speaker Section
For HT-SL55 only
• SS-MSP55 for front and surround speakers
• SS-CNP55 for center speaker
For HT-SL50 and HT-SL40 only
• SS-MSP50 for front and surround speakers
• SS-CNP50 for center speaker
Speaker system Full range, magnetically
shielded
Speaker units
SS-MSP55
80 mm, cone type
SS-CNP55 55 mm, cone type
SS-MSP50/SS-CNP50 55 × 110 mm, cone type
Enclosure type Bass reflex
Rated Impedance 8 ohms
Power handling capacity (Maximum input
power)
SS-MSP55/SS-CNP55
60 W
SS-MSP50/SS-CNP50 35 W
Sensitivity level
SS-MSP55/SS-CNP55
84 dB (1 W, 1 m)
SS-MSP50/SS-CNP50 86 dB (1 W, 1 m)
Frequency range 160 Hz – 20,000 Hz
Dimensions (w/h/d)
SS-MSP55
Approx. 105 Ч 153 Ч 128
mm
SS-MSP50 Approx. 76 Ч 162 Ч 106
mm
SS-CNP55 Approx. 200 Ч 79 Ч 131
mm
SS-CNP50 Approx. 280 Ч 82 Ч 106
mm
Mass
SS-MSP55
Approx. 1.2 kg
SS-MSP50 Approx. 0.8 kg
SS-CNP55 Approx. 0.8 kg
SS-CNP50 Approx. 1.0 kg
AM tuner section
Tuning range
Models of area code CEL, CEK, SP
With 9-kHz tuning scale: 531 – 1602 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity 50 dB/m (at 999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity At 9 kHz: 35 dB
General
Power requirements
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
SP 220 – 230 V AC, 50/60 Hz
Power consumption
Area code Power consumption
CEL, CEK 130 W
SP 105 W
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d)
STR-KSL50:
430 Ч 56 Ч 290 mm
STR-KSL40: 430 Ч 56 Ч 288 mm
including projecting parts
and controls
Mass (Approx.) 4.5 kg
continued
GB10ADD_HT-SL55.p65 28/4/2003, 11:58 AM 41