Sony BDV-E500W - Manual (Page 60)

60 US
Using an S-AIR Product
The unit is compatible with the S-AIR function
(page 120), which allows sound transmission
between S-AIR products.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
Note
• You cannot operate this function if you do not insert
the wireless transceiver in the unit correctly
(page 27).
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Set the S-AIR ID switch of the unit to
the desired ID.
You can select any ID (A, B, or C).
2
Press "/1.
The system turns on.
3
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
S-AIR sub unit
(surround amplifier)
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Room A
Room B
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
ANTENNA
AUDIO
DIGITAL IN DMPORT
HDMI OUT
COMPONENT VIDEO OUT VIDEO OUT
S-AIR ID
AUDIO IN AUDIO IN
A. CAL MIC ECM-AC2
SPEAKER
Y P B / C B P R / C R FM
AM
COAXIAL 75
COAXIAL OPTICAL
R
L
R
L
FRONT R FRONT L CENTER SUBWOOFER
EXT LAN(100)
DC5V
700mA MAX
EZW-RT10
TV TV
DIGITAL IN
SAT/CABLE
A B C
DC5V 500mA MAX SPEAKER
S-AIR ID switch
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit