Sony BDV-E500W - Manual (Page 35)

35 US
Ge
tting Star
te
d
12
Press X/x to select the setting for the
Control for HDMI function.
Select [On] to use the [Control for HDMI]
function (page 66) when connecting Sony
components that are compatible with the
Control for HDMI function.
If you do not use the [Control for HDMI]
function, select [Off].
13
Press or c.
The Setup Display for [BD Internet
Connection] appears.
14
Press X/x to select the setting for the
BD Internet connections.
Select [Allow] to allow Internet
connections.
If you do not allow the connections, select
[Do not allow].
15
Press or c.
The Setup Display for [Standby Mode]
appears.
16
Press X/x to select the standby mode.
You can operate the player quickly after
turning on this function.
Select [Quick Start] if you want to shorten
the startup time from the standby mode. The
default setting is [Normal].
Note
• Quick Start mode will increase electricity
consumption in the standby mode.
17
Press or c.
The Setup Display for [Auto Calibration]
appears.
18
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
19
Press X/x to select [Start].
To cancel, select [Cancel].
On
You can operate this unit in conjunction with a TV connected by HDMI.
Check your TV settings when using this function.
Easy Setup - Control for HDMI
ANTE NNA
AUDI O
DIGIT AL IN
S-AIR ID
AUDIO IN
AUDIO IN
A. CA L MIC
ECM -AC2
FM
AM
COA XIAL 75
COA XIAL
OPTIC AL
R
L
R
L
EXT
EZW
-RT1 0
TV
TV
DIGIT AL IN SAT/C ABL E
A B C DC5V
500m A MA X
Calibration mic