Sanyo PLC WTC500AL - Manual (Page 37)

37
The Auto PC Adjustment
function operates to adjust
the projector.
PC System Menu
The PC System Menu icon
Selected system is
displayed.
Systems in this dialog box
can be selected.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC System Menu icon.
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
1
2
Custom Mode (1–10) set in the
PC Adjust Menu (pp.39–40).
PC system can also be selected manually.
Computer System Selection
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu
box and the Auto PC Adjustment function
works to display proper images. If the image is
not projected properly, a manual adjustment is
required (pp.39-40).
There is no signal input from the computer.
Check the connection between your computer
and the projector. (See “Troubleshooting” on
page 71.)
Auto
-----
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1–10 (pp.39–40).
Mode 1
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.
SVGA 1
Selecting Computer System Manually
*Mode 1 and SVGA 1 are examples.
PC System Menu
Computer Adjustment
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC
Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format
and tunes to project a proper image without any additional settings. (Signal formats provided in this projector
are shown on pages 80–81.)
One of the following messages may appear when: