Suzuki DF250SS - Manual (Page 8)

7
Suzuki’s Anti-Corrosion Finish
The outside of the DF250SS is covered with Suzuki’s multi-
layered anti-corrosion finish that is specially formulated to increase
the durability of the engine and help protect the aluminum exterior
that is constantly exposed to saltwater. This advanced finish offers
maximum bonding of the finish to the outboard’s aluminum
surface, creating an effective treatment against corrosion.
Acrylic Resin Clear Topcoat
Acrylic Resin Black
Metallic Basecoat
Epoxy Primer
Undercoat
Suzuki Anti-
Corrosion Finish
Suzuki Aluminum Alloy
Flywheel Magneto
Fuel Filter with Water Separator
The fuel system incorporates a large, easy to maintain fuel filter
that removes contaminants from the fuel before they can reach the
engine. A water separator built into the fuel filter offers a height-
ened level of protection by keeping water out of the engine.
Fuel Filter
Guarding Against the Elements S
Large Air Intake, and Flywheel with
Fan Blades
Increasing airflow into the engine can increase power output, so
Suzuki engineers designed the DF250SS with dual air induction
ports to maximize airflow into the
engine to obtain maximum power
output. The increased airflow delivers
more low- to mid-range torque and
provides the outboard with a wider
powerband.
The flywheel is designed with fan
blades that expel heat from within the
engine cover and discharge the hot air
out of the side of the cowl, keeping the
temperature within the cowl under control.
R
Air Intake
3