4 platter / global section, Platter / global section – Stanton Deck Control Surface SCS.1d User Manual
Page 11

8
3.4
Platter / Global Section
This section controls the assignment of the platter as well
as global functionality.
The DECK SELECT button will allow you toggle virtual decks
on screen. In this way when you switch virtual decks, the
SCS.1d will also change its state to match the on screen
deck. By using one physical SCS.1d you can control
multiple virtual decks.
The VINYL, CONTROL and BROWSE buttons all modify the
motorized jogwheel’s functionality within the application.
The motorized platter is normally used for scratching and
scrubbing through a song when “VINYL” is activated.
However, the Control button allows the platter to be freely
used as a large parameter control such as scratching an
effect. BROWSE is used to scroll the playlists in
applications that support mapping to browser view.
Depending on the control mode the ENTER and CANCEL buttons will allow for expanded functionality with the
platter.
SETUP button will allow for adjustments of the overall deck controller. Upon pressing setup you will see the
current firmware version. Using the first encoder will allow you to select a value to change; the second encoder
will allow you to adjust the value.
‐
Contrast: Adjusts the contrast of the LCD screens.
‐
Torque: Adjusts the torque of the platter to simulate different turntables.
‐
MIDI Ch: Changes the output MIDI channel of the device. It is suggested NOT to change this as
presets usually expect the deck to send data from the default MIDI channel.
‐
Decay: Adjusts the acceleration curve of the encoders.