Sony D-VE7000S - Manual (Page 48)

Viewi
Playe
Comp
You can inp
component
need a plug
jack. Refer
with the co
1 Conne
Plug ada
not supp
to VID
2 Set the
Listening from an
Audio Component
By connecting an audio component having
built-in Dolby Digital decoder or DTS
decoder using an optical digital cord, you
can enjoy the disc recorded in Dolby Digital
or DTS sound with surround effects. Set the
[AUDIO SETUP] items according to the
audio component connected (
 page 43).
Refer to the operating manual supplied with
the component connected.
Using an audio cord
1 Connect an audio component.
to AUDIO
LINE SELECT
Stereo component
Audio cord
(mini jack, not supplied)
2 Set the LINE SELECT switch to OUT.
 Tip
When the audio component supports Dolby
Surround (Pro Logic), select [Dolby Surround] in
[DOWNMIX] under [AUDIO SETUP]. Otherwise,
select [NORMAL] (
 page 43).
Using an optical digital
cord
1 Connect a digital audio component.
to AUDIO
LINE SELECT
Digital audio
component
Optical digital cord
(not supplied)
to optical digital
input
2 Set the LINE SELECT switch to OUT.
 Tips
• When the audio component supports Dolby
Surround (Pro Logic), select [Dolby Surround] in
[DOWNMIX] under [AUDIO SETUP]. Otherwise,
select [NORMAL] (
 page 43).
• When connecting an amplifi er having a built-in
Dolby Digital decoder, select [Dolby Digital] in
[Dolby Digital] in [DIGITAL OUT SETUP] under
[AUDIO SETUP] (
 page 43).
• When connecting an amplifi er having a built-in
DTS decoder, select [DTS] in [DTS] in [DIGITAL
OUT SETUP] under [AUDIO SETUP] (
 page
43).
48
D-VE7000S.US.2-683-363-11(1) D-VE7000