Samsung PCL 6215R - Manual (Page 57)

C HAPTER F OUR : S PECIAL F EATURES
4.14
S
P E C I A L
F
E AT U R E S
1
Press the Menu button.
Move the joystick down to
select “PIP”, then press the
joystick to enter.
Changing the PIP Channel
2
Move the joystick down to
select “Channel,” then
move the joystick to the
left or right to change the
channel that appears in
the PIP window.
Press the Menu button to
exit.
When you press the Locate button repeatedly, the PIP window
moves from corner to corner on the TV screen.
Changing the Location (Rotating) in PIP mode
This procedure scans all of the available channels and then stores
them in memory.
Press the Scan button, and the memorized channels will appear in
sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When Scan stops, the viewing mode will return to its original set-
ting.
Scanning the Available Channels
▼
Quick way to access PIP CH:
Simply press the (PIP) “CH” button
on the remote control.
Note: The PIP channels are not available when RF is set to ANT-B.
(The PIP channels link to ANT-A).