Sirius Satellite Radio STREAMER SIR-STRC1 User Manual
Page 32
Streamer Replay SIR-STRC1 User Guide
32
Changing the Lock/Unlock Code
The fi rst time the Lock/Unlock function is accessed,
the user must enter the default lock code. The default
lock code is 0000. This code can be maintained or
changed. To change the default lock code, perform
the following procedure while in the “Menu Options”
List mode:
1. Use the Rotary Knob to highlight the “Lock
Options”. Press the Rotary Knob to select.
2. Select “Edit Code” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Enter the default code 0000.
4. The New Code prompt will appear. Enter your new
four digit code using the 0-9 number buttons (below
right). You will then be prompted to confi rm the new
code by entering your code again.
5. The lock code is now changed.
Note: you can use this same method to Edit the code
once it is changed from the default.
Lock Options
The Streamer Replay Receiver has the ability to
lockout the use of any channel, or channels you do
not want others to access without your permission.
Like the Skip feature, the locked channel will not
appear when the user changes channels with the
Rotary Knob. When the user tries to access the
locked channel using the Direct Tuning function,
the “Enter Code” screen will be displayed and the
channel will not be accessed until the proper code is
entered.
While in the “Menu Options” List mode, follow the
steps below to Lock a channel:
1. Use the Rotary Knob to highlight the “Lock
Options”. Press the Rotary Knob to select.
2. Select “Lock/Unlock” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Use the Rotary Knob to select the channel you wish
to lock. Press the Knob in to select (below right).