Sun Microsystems 6900 - Manual (Page 157)

137
C H A P T E R
Sun Proprietary/Confidential: Internal Use Only
10
Troubleshooting Using Microsoft
Windows 2000
General Notes
■ Use the Manufacturer’s HBA Utilities to monitor and diagnose the HBAs. The
examples in this chapter use Qlogic’s SANblade Manager utility.
■ The Storage Automated Diagnostic Environment running on the Storage Service
Processor is not able to monitor the host-to-switch link.
■ The Storage Automated Diagnostic Environment running the Storage Service
Processor is not able to execute
switchtest (1M) on switch ports with Microsoft
Windows 2000 HBAs currently attached as F ports.
■ The FRUs in the host-to-switch link can be isolated using the HBA utilities on the
host and Storage Automated Diagnostic Environment’s
switchtest on the
Storage Service Processor, in conjunction with loopback connector plugs.
■ Install the Sun StorEdge T3+ array Failover Driver software before connecting the
host to the switches.