Sony VPH-D50QM - Manual (Page 10)

10
(EN)
Location and Function of Controls
6 RGB SIZE key
Enters the size adjustment mode for the input signal.
Next adjust the size of the picture using the four arrow
keys.
B : to reduce horizontal size
b : to expand horizontal size
V : to expand vertical size
v : to reduce vertical size
Press the MEMORY key 8 to store the adjusted value
and display the adjusted picture.
7 CENT R/B keys
Enter the centering adjustment mode of the red and
blue.
R: Press to enter the red centering adjustment mode.
B: Press to enter the blue centering adjustment mode.
Perform the centering adjustment using the four arrow
keys.
8 MEMORY key
Stores various adjusted data into memory.
9 Menu operation keys
Used for various adjustment functions and for menu
operations.
MENU: Displays the main menu. Press it again to
turn off the menu.
Arrow keys: Adjusts the value or selects the item in
the menu.
ENTER: Stores the settings in the menu.
!º POWER ON/OFF keys
Turn on and off the projector when the MAIN
POWER switch on the projector is set to ON.
!¡ POWER ON indicator
Lights in green when the power of the projector is on.
!™ Error code window/rear remote control detector
Indicates an error code when an operational error
occurs.
!£ NORMAL key
Erases the test pattern or cancels the various
adjustment modes.
!¢ BLKG (blanking) key
Enters the blanking adjustment mode.
You can adjust the blanking with the four arrow keys.
!∞ RGB SHIFT key
Enters the shift adjustment mode for the input signal.
Next adjust the position of the picture using the four
arrow keys. The picture shifts in the direction of the
arrow on the pressed key.
Press the MEMORY key 8 to store the adjusted value
and display the adjusted picture.
!§ RESET key
Resets the adjusted levels to the factory preset or service
adjusted levels.
!¶ u STANDBY indicator
Lights in orange when the projector is turned on with the
MAIN POWER switch.