Motion detection – Samsung SNS-100/400 User Manual

Page 28

SNS-100/400 Network Server

◊ RS485/422 Setup

Item

Description

Baud Rate

Set the data transmission speed per second

Data Bit

Set the data transmission bit

Parity Bit

Select error-check method when data is displayed

Stop Bit

Set insert bit when data transmission is completed

Note

When RS-485/422 setup configuration is incorrect, the PTZ camera motion may not work. See the users’

manual for the connected camera and carefully configure it accordingly.

◊ Swing Setup

Item

Description

First Preset / Second Preset

Designate the two presets to be used in swing mode

Mode

Select movement method between the two points((Pan/Tilt Swing)

Speed Set

movement

speed

Duration

Sets the stop time at one preset point

◊ Group Setup

Item

Description

Group No.

Sets the desired group number

Preset No.

Sets each point’s preset number

Travel Speed

Sets the travel speed between each point interval

Dwell Time

Sets the stop time at each position

4.2.7. Motion Detection

This sets up motion detection function of the network server.

◊ Motion Detection Configuration

Item

Description

Channel Set

Used when selecting the channel. (Applied only to 4 channel servers.)

Grid Display

Basic grid, used to choose area on the screen, is displayed or hidden.

Select Area

When selecting motion detection area, click