Samsung TS-H292A - Manual (Page 14)

No additional device driver is needed for Windows 98/2000/ME/XP/NT4.0, as the default Windows device
driver is used. You can check that the CD-R/RW drive has been correctly detected by Windows. To do so,
proceed as follows.
The SAMSUNG device driver enables discs in the CD-R/RW drive to be read but not recorded in an MS-DOS
environment; the driver is located in the D driver folder on the CD record utility disc.
Installing the Device Driver
Double-click on the My Computer icon on your desktop.
Double-click on the Control Panel folder.
Double-click on the System icon.
Click on the Device Manager tab.
Expand the CD-ROM branch.
The SAMSUNG CD-R/RW SW - *** device name is displayed.
Connecting the Cables
Setup