Displaying the audio information, Switching subtitles, Playback functions – Sharp BD-HP17U User Manual
Page 32
Playback Functions
Partial Repeat Playback (Repeat
Playback of a Specified Part)
DVD VIDEO
DVD-R
DVD-RW
AUDIO CD
NOTE
Some operations in the following playback function cannot
be performed depending on the specifications of the disc.
•
Press
REPEAT during playback.
Press
c/d to select “Scene Selection”, then
press
ENTER.
“Set Start Point” displays.
Playback Title
Playback Chapter
Scene Selection
Set Start Point
Press
ENTER at the scene where you want to
set the start point.
“Set End Point” displays.
Press
ENTER at the scene where you want to
set the end point.
You can press
V FWD to fast forward to the scene
where you want to set the end point. When you
reach the desired scene, simply press
I PLAY and
then ENTER to set the end point. To cancel Repeat
Playback, press REPEAT.
1
2
•
3
•
4
•
NOTE
Press
LSKIP/
l, the Repeat Playback is cancelled
and the next chapter being play back.
Press
KSKIP/
k once, the Repeat Playback is
cancelled and the player returns to the start of current
chapter (track).
If you press
KSKIP/
k again (within about 5 seconds)
the player will skip to the beginning of the previous chapter
(track).
For Partial Repeat Playback, set the start and end points
within the same title.
Repeat Playback may be forbidden depending on the disc.
Partial Repeat Playback may not work in multi-angle
scenes.
If you press DISPLAY, you can confirm the Repeat
Playback status.
•
•
•
•
•
•
•
Displaying the Audio Information
You can display the audio information on the disc
currently being played back by pressing AUDIO.
The displayed contents vary depending on the disc.
DVD VIDEO
BD VIDEO
The audio track currently being played back will be
displayed.
If multiple audio channels are recorded, you can switch
the audio channel by pressing AUDIO.
DVD-R
DVD-RW
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be switched.)
NOTE
When you play a program recorded in stereo or monaural,
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set
“Audio Out” to “PCM” (Page 37), or if you want to change
the audio channel, listen via the analog output jacks.
•
Switching Subtitles
If subtitles are provided in multiple languages, you can
switch between them.
Press
SUBTITLE during playback.
The display indicates the subtitle number currently being
played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles change.
“–” is displayed if a disc has no subtitles.
You can also select “Off”.
•
•
•
•
30