Sharp BD-HP17U - Manual (Page 22)

Before Starting Playback
Turning the Power On
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
Entering standby
Press POWER on the remote control or on the Player
to enter standby.
If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
When the ON/STANDBY indicator is blinking (may take
some time), the Player cannot be turned on. •
•
Indicators on the Player
ON/STANDBY indicator
Green on Power on
Red blinks Preparing for standby
Red on Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 22.)
BD/DVD/CD mode indicator
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
When you turn on the power, the Menu screen
automatically displays for a while.
Press EXIT to erase the display. •
20
POWER
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
ON/STANDBY indicator