Siemens 43B1-M - Manual (Page 18)

Colour monitor 43B1-M
16 - English A26361-K883-Z100-1-5E19
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 43B1-M is not yet displayed in the list of monitors, you can select the
following monitor instead:
C383 FA or 3814 FA
Supported modes
i
The display position and scanning are set to optimum values automatically for the
operating modes listed below. Depending on the screen controller used, it may be
necessary to adjust the display position and scanning. In this case, you can change and
save the settings (see "Operation of the monitor").
Screen resolution Refresh rate Horizontal frequency
720 x 400 70 Hz 31.47 kHz
640 x 480
640 x 480
640 x 480 60 Hz
66.6 Hz
75 Hz
31.47 kHz
35.00 kHz
37.50 kHz
800 x 600
800 x 600 60 Hz
75 Hz 37.88 kHz
46.88 kHz
832 x 624 75 Hz 49.73 kHz
1024 x 768
1024 x 768
1024 x 768
1024 x 768 60 Hz
70 Hz
75 Hz
74.9 Hz
48.36 kHz
56.48 kHz
60.02 kHz
60.24 kHz
1280 x 1024
1280 x 1024 60 Hz
75 Hz 63.98 kHz
79.98 kHz
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the
technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a
refresh rate of 60 Hz.
i
From a technical point of view, it is preferable to set a refresh rate of above 60 Hz on an
LCD monitor with a TFT display.