Sanyo XACTI VPC-CA100EX - Manual (Page 94)

69
English
AFTER USING THE CAMERA IN WATER
After using the camera in water, wash it with fresh water and dry it completely.
1
Turn off the camera, and close the battery cover and terminal cover
securely.
2
Wash the camera with fresh water.
h Fill a shallow basin with fresh water, and immerse the closed camera for
about 5 minutes. Rotate the monitor unit several times to clean it
completely.
3
Dry the camera.
h Use a dry cloth to wipe off any drops adhering to the camera, and leave
it to dry completely in a well-ventilated place away from direct sunlight.
h Do not use a hair dryer or the like to dry the camera. Exposing the
camera to high temperatures may cause the camera and/or waterproof
seal to become deformed.
HINT
About the handstrap
i Wash the handstrap in fresh water after detaching it from the camera.
i After washing, leave it to dry in a place away from direct sunlight.