Casio MJ-100TG - Manual (Page 55)

— 53 —
(0 + 0 – 5) Ч ч 5 = 0 R (0 – 5 – 5) Ч 3 ч 5 =
)
01 REV +
20.�
* 1
c
01 REV CRT +
20.�
* 2
* 3
20-
* 4
c
01 REV -
20.�
)
02 REV -
10.�
c
02 REV CRT -
10.�
5-c
02 REV -
5.�
)
03 REV *
5.�
)
04 REV ,
2.�
c
04 REV CRT ,
2.�
3/c
04 REV ,
3.�
)
05 REV
=
5.�
* 5
)
06 REV ANS
6.�
* 6
* 1 Press the c key before the step you want to correct.
* 2 The CRT (CORRECT) indicator is on the display while Calculation Memory
editing is enabled.
* 3 Note that you can only edit values and command key operations (+, -, *,
/
). You can edit only one step.
* 4 After you are ˚nished making the changes you want, press the c key
again.
* 5 Scroll to the last step to check the new result.
* 6 The result is always produced by the calculation. You cannot change it by inputting
a value.
• While the step you want to edit is displayed, press c and then (
or ). This will cause one of the values in the displayed step to start
ashing. You can change the ashing value to another value. Move the
ashing between values by pressing ( or ) again. After changing
any of the values you want, press c to exit editing.
• When you edit the contents of a calculation, the rounding and decimal
place settings in effect when you make the changes affects all steps
stored in Calculation Memory.