Wing section attachment -5, Wing axle attachment -5, Assembly – Servis-Rhino SR15M User Manual

Page 75

ASSEMBLY

Assembly Section 3-5

SR10M/SR15M 10-01

ASSEMBLY

WING AXLE ATTACHMENT- MECHANICAL LEVEL LIFT

Attach the Wing Axles (1) to the Wing Sections (2) with 1 x 7 bolts (3), flatwashers (4), and locknuts (5) on
outboard side and 1 x 4-3/4 bolt (6), and locknuts (5) on the inboard side. FIGURE 6.

FIGURE 6. Wing Axle Attachment

WING SECTIONS ATTACHMENTS

While the Center Section is still solidly blocked, attach the Wing Sections (1) in the horizontal plane. Using
Hinge Pins (2), attach the Right and Left Wing Sections to the Center Sections.

NOTE: Wing Sections may require slight lifting after the Hinge Pin is started to aid pin installation.

Lock the Wing Sections in place with the Hinge Pins. Insert 5/16 x 1-1/2 bolt (3) and locknut (4) at the end of
each of the Hinge Pins and tighten securely. FIGURE 5.

FIGURE 5. Wing Sections Attachments

R 11-11-99

This manual is related to the following products:

SR10M