Sony DR BT160AS - Manual (Page 18)

18
US
To adjust the volume
Push the jog switch up or down
while listening to music to adjust the
volume.
Tips
• Depending on the Bluetooth device, it
may be necessary to adjust the volume
on the connected Bluetooth device as
well.
• Volume for calling and listening to
music can be adjusted independently.
Even if you change the volume while
calling, the volume for music playback
does not change.
• The volume level on this unit may vary
depending on the connected Bluetooth
device.
To stop use
1
Terminate the Bluetooth
connection by operating
the
Bluetooth device.
2
Press and hold the
POWER button for
about 2 seconds.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the Bluetooth
device.
Controlling the audio
device – AVRCP
If the Bluetooth audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.
Note
Operation of the Bluetooth connecting
device by this unit will vary depending on
its specification.
Status: In stop or pause mode
1 Starts playback* 1
2 Stop
3 Skip to previous/next
4 Fast-rewind/Fast-forward* 2
Status: In play mode
5 Pause* 1
6 Stop
7 Skip to previous/next
8 Fast-rewind/Fast-forward* 2
* 1 You may need to press the button
twice depending on the Bluetooth
device.
* 2 Some Bluetooth devices may not
operate.
1
3
Short Press Long Press
Nx
. / >
2
4
Short Press Long Press
Nx
. / >
5
7
6
8