Sony DR BT160AS User Manual

Page 13

Perform pairing
procedure on the

Bluetooth

device to

detect this unit.

The list of detected devices
appears on the display of the
Bluetooth device. This unit is
displayed as “DR-BT160AS.”
If “DR-BT160AS” is not
displayed, repeat from step 1.

Notes

• For details, refer to the operating

instructions supplied with the
Bluetooth device.

• When pairing with a Bluetooth

device that cannot display a list of
detected devices or that has no
display, you may pair the device by
setting both this unit and the
Bluetooth device to pairing mode.
At this time, if passcode is set
besides “0000” on the Bluetooth
device, pairing cannot be done with
this unit.

Select “DR-BT160AS”
on the display of the

Bluetooth

device.

If Passcode

input is

required on the display
of a

Bluetooth

device,

input “0000.”

Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
“Pairing complete” appears on
the display of some Bluetooth
devices.

* Passcode may be called “Passkey,”

“PIN code,” “PIN number,” or
“Password.”

Start the

Bluetooth

connection from the

Bluetooth

device.

This unit memorizes the device
as the last connected device.
Some Bluetooth devices may
connect with the unit
automatically when pairing is
complete.

Tips

• To pair with other Bluetooth devices,

repeat steps 1 to 5 for each device.

• To delete all pairing information, see

“Initializing the unit” (page 28).