beautypg.com

Displaying the audio information, Switching subtitles, Switching the angle – Sharp AQUOS BD-HP80U User Manual

Page 38: Displaying the angle mark, Playback functions

background image

Playback Functions

Displaying the Audio Information

You can display the audio information on the disc
currently being played back by pressing AUDIO.

The displayed contents vary depending on the disc.

DVD VIDEO

BD VIDEO

The audio channel currently being played back will be
displayed.
If multiple audio channels are recorded, you can switch
the audio channel by pressing AUDIO.

DVD-R

DVD-RW

When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be switched.)

NOTE

When you play a program recorded in stereo or monaural,
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set the
digital audio output setting to “PCM” (page 40).
Settings for audio can also be changed in the Function
Control screen (Page 37).
The operation of audio differs according to each disc. You
may need to refer to the operation manual of the disc.
The display for audio information automatically disappears
after 5 seconds.

Switching Subtitles

DVD VIDEO

BD VIDEO

If subtitles are provided in multiple languages, you can
switch between them.

Press SUBTITLE during playback.

The display indicates the subtitle number currently being
played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles change.
“–” is displayed if a disc has no subtitles.
You can also select “Off”.

NOTE

Settings for subtitles can also be changed in the Function
Control screen (Page 37).
The operation of subtitles differs according to each disc.
You may need to refer to the operation manual of the disc.
The display for subtitle information automatically
disappears after 5 seconds.


Switching the Angle

DVD VIDEO

BD VIDEO

If multiple angles are recorded, you can switch
between them.

Press ANGLE during playback.

The display indicates the angle number currently being
played back. Each time you press ANGLE, the angle
switches.

To return to the previous angle, press ANGLE to cycle
through the angles until you return to the original angle.

NOTE

The displayed items vary depending on the disc.
If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
The operation of angles differs according to each disc. You
may need to refer to the operation manual of the disc.
The display for angle information automatically disappears
after 5 seconds.


Displaying the Angle Mark

DVD VIDEO

BD VIDEO

You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. The settings can be changed in
“Settings” – “Playback Setting” – “Angle Mark Display”
(Page 41).

36