Sony Remote Control Panel RCP-D50/D51 - Manual (Page 42)

42
Menu Configuration and Basic Menu Operations
OTHERS menu (with the CCU-TX50)
Menu 2ndary menu Submenu Control item Function
Adjusting White Shading • R To adjust the V white shading (vertical variation of the white) of the
R signal
• G To adjust the V white shading of the G signal
• B To adjust the V white shading of the B signal
Camera Screen Mode a) Screen Mode To select the Screen mode (4:3/16:9)
Config
File Scene Trans CAM->MS To transfer a scene file (from the camera to the Memory Stick)
MS->CAM To transfer a scene file (from the Memory Stick to the camera)
RCP Config RCP Buzzer • Call To set the volume of the call buzzer
Adjusting Volume • Touch To set the responding sound volume of the touch panel
• Switch To set the confirmation sound volume of the self-illuminating
switches
• Master To set the total buzzer sound volume
Call Buzzer To turn the call buzzer ON/OFF
Touch Click To turn the responding sound of the touch panel ON/OFF
SW Click To turn the confirmation sound of switches ON/OFF
All Off To turn the volume of all the buzzers ON/OFF
LED Bright • Switch To set the brightness of respective LEDs
• Tally
• Other
• Master To set the brightness of the all LEDs of the unit
RE Setting BLACK/FLARE To select the function for the BLACK/FLARE knob
Black: Black balance adjustment
Flare: Flare balance adjustment
VR Setting VR STD Mode To select the initial settings for IRIS or MASTER BLACK
adjustment mode: Absolute or Relative
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest
response position)
M. Black VR (Only available for RCP-D50) To select the response rate of the
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,
and 1/4, where 1/1 is the quickest response position)
Information To display the software version of the unit
Cable Comp Cable Length To set the length of the remote cable (5 m/25 m/50 m)
SW Setting • SW Assign/Sel To allocate a function to the ASSIGN button
No Assign: No assignment
Black/Flare: Switching the function of the BLACK/FLARE knobs
Black Auto: ON/OFF of the auto black
(Not operative)
ATW: ON/OFF of the auto tracing white balance
TLCS: ON/OFF of the total level control function
DynaLatitude: ON/OFF of the DynaLatitude function
(Not operative)
CCU character: Switching the CCU-TX50 character pages
CAM No. CAM ID->No. To switch the display of the camera number/tally indication of the
unit between camera ID and camera number
b)
• No. To select the camera number to be displayed on the RCP
a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.
b) Camera ID cannot be displayed when connected to the CCU-TX50.