Samsung 700T User Manual
Page 5
Firmware for UEFI
boot
on the bezel.
Select “ENTER SETUP”
(note: if you do not have a USB keyboard attached
you can use the VOL+/VOL- keys to select, Rotation Lock button as “enter”, and both vol
buttons at the same time to go back.)
Select ADVANCED
Change “
UEFI Boot Support
” to
“Enabled
”
Save settings and exit.
STEP #4
Download
Windows 8
Customer Preview
Build
Options for Installing:
Download Windows 8 Customer Preview from Microsoft @
and follow the prompts to install.
Use a DVD or USB key to install (if needed, download the build from
preview.windows.com and copy the files from c:/Windows ESD/ to a
bootable USB key.)
STEP #5
Install Windows 8
Customer Preview
Follow the below steps if you are installing for installing from your newly
created USB key or DVD.
Shut down/power off the PC. Press the computer’s Power button while
holding down “Home Button”, which is the “HOME/WINDOWS”
hardware key on the bezel (Enter BIOS Setup). Go to Exit menu with
the combination Rotation Key and VOL+/-. Select your USB key or
attached USB DVD drive listed on Boot Override by using VOL+/VOL-
Key(The initial string is “UEFI:”, for instance in the case of DVD, You
should select “UEFI: USB CD/DVD Drive”). Press Rotation key as Enter
Key.
Follow the prompts to install Windows 8 Technical Preview on your system.
(note: installation will complete with three unknown devices in Device Manager, the
below steps will resolve these driver issues.)
STEP #6
Once the Windows 8 install has successfully completed the next step is to