Samsung MX-C850 - Manual (Page 11)

ENG
11
Your system is equipped with a clock which allows you to turn it on and
off automatically.
You should set the clock:
When you first purchase the mini-compact system ◆
After a power failure ◆
After unplugging the unit
◆
For each step, you have a few seconds to set the required
☛
options.
If you exceed this time, you must start again.
Switch the system on by pressing the
1
STANDBY/ON ( ) button.
Press the
2
TIMER/CLOCK button twice.
Result: CLOCK is displayed.
Press the
3
ENTER ( ) button.
Result: The hour flashes.
To..
4
Press the TUNING/ALBUM button.
Increase the hours .......................
Decrease the hours .....................
When the correct hour is displayed, press
5
the ENTER ( ) button.
Result: The minutes flash.
To..
6
Press the TUNING/ALBUM button.
Increase the minutes
Decrease the minutes
When the correct time is displayed, press
7
the ENTER ( ) button.
Result: The clock will be set.
You can see the time, even when you are using another function, by ◆
pressing the TIMER/CLOCK once.
You can also use the ◆ [ , ] buttons or the Tuning/Jog Control
on the main unit to instead of the TUNING/ALBUM button or
in step 4, 6.
You can view all functions available on the display, adjust the brightness
of the display and select the Display/LED either on or off.
Each time you press the DISPLAY button on the remote control or the
DEMO & DISPLAY button on the main unit (MX-C830/MX-C850 only), the
display mode will change as follows:
The Demo function ◆
All functions available on the system appear on the front panel display.
The Dimmer function
◆
The Dimmer function is selected and the display darkens.
LED OFF
◆
The LED is turned off while the dimmer function is working.
Clock ON
◆
The Clock you set is displayed.
LED/Display ON
◆
All Display and LED are turned on.
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
DISPLAY function
Setting the Clock
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
What is WMA?
➣
WMA means Windows Media Audio, the global standard for audio
signal compression technology.
What is MP3?
➣
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
File Compatibility
➣
The unit will playback files created in MP3 format ◆
(Mpeg1.Layer3) with *.mp3 as their extension, and some WMA
files with .WMA extension can’t be playback.
Playback of MP2 or 22KHz file is not supported. ◆
How many MP3 files can a CD-R or CD-RW disc record?
➣
The maximum capacity of one CD-R or CD-RW disc is 680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
Regarding the playback of CD-R/RW
➣
In the case of an original CD-R(Recordable) recorded in audio ◆
CD format, CD-RW(Rewritable) and editing by the user,
playback is processed on the respective completed status. (In
some cases, due to the disc's characteristics and its recording
status, playback may not be available.)
The CD-RW is comparably less reflexive than CD which ◆
causes more time delay to read.
MX-C870-C850-C830-XAC-ENG.indd 11 2010-6-22 15:32:41