Stamina Products CT2.0 - Manual (Page 6)

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
[email protected]
6
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the FRONT STABILIZER(2) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)
(64), ARC WASHERS(M8)(89), LOCK WASHERS(M8)(91), and ACORN NUTS(M8x1.25)(87).
STEP 2
Attach the REAR STABILIZER(3) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(64),
ARC WASHERS(M8)(89), LOCK WASHERS(M8)(91), and ACORN NUTS(M8x1.25)(87).
NOTE: You can adjust the LEVELING CAPS(63) on the REAR STABILIZER(3) to keep the CT2.0 CROSS
TRAINER stable.