Sterling Trucks Acterra MX - Manual (Page 26)

IMPORTANT: After performing all operations listed in
this table, perform all daily, weekly, and monthly
maintenance operations listed in the "Pretrip and
Post-Trip Inspections and Maintenance" chapter of
the
Acterra ® Driver’s Manual. Also, perform all M1,
M2, and M3 Maintenance Interval Operations at the
M4 Maintenance Interval.
NOTE: Maintenance operations appearing in italics in
this table are for noise emission control components.
Numbers in this table are maintenance operation ref-
erence numbers matching those in the text of this
manual. The M4 Maintenance consists of all M1, M2,
and M3 Interval Operations plus the other operations
listed below.
M4 Maintenance Interval Operations
Maint.
Oper. No.
M4 Maintenance Interval Operations
00–10 Perform All M1 Operations
00–11 Perform All M2 Operations
00–12 Perform All M3 Operations
01–01 Engine-Support Fasteners Checking
15–01 Alternator, Battery, and Starter Checking
20–02 Radiator Pressure Flushing and Coolant Changing
26–02 Eaton Fuller and TTC Transmission Fluid Changing and Magnetic Plug
Cleaning
31–01 Frame Fastener Torque Checking
33–04 All-Axle Alignment Checking
35–03 Axle Lubricant Changing and Magnetic Plug Cleaning
46–04 Power Steering Reservoir Fluid and Filter Changing
General Information
00
M4 Maintenance Interval Operations Table: 00–13
Acterra Maintenance Manual, October 2008 00/19