Sanyo VPC-TP1010 - Manual (Page 24)

EN-23
Taking Images When the Smile Feature Is On
With the camera’s new “smile detection” function, this camera detects smiles so you do
not miss those special moments in life.
1. Tap the Mode / Scene mode icon to set the camera to [Smile Detection].
2. Compose the image, and press the shutter button
down fully.
3. Once the camera detects a smile, it will
automatically capture 3 images (by default, the flash
mode setting is set to d).
„
If the [Capture Md.] is set to [Single], the camera
will only capture an image after it detects a
smile.
„ When capturing group shots (if the number of
people is more than 1), the camera will automatically capture the image(s) when
it detects two smiles.
„ If the camera does not detect a smile within 30 seconds, the camera returns to
preview display.
„ Press the shutter button once again to reactivate this function.
Find Blur
With the camera’s new “Find Blur” function, this camera finds the blurry photo when
capture under Continuous.
1. Tap the Mode / Scene mode icon to set the
camera to [ ].
2. Press the MENU button.
3. Drag the slide bar up and down to select [Find
Blur].
4. Set “Find Blur” on.
5. Then tap [
] to exit from the menu.
6. Press the shutter button to capture your image.
7. Tap [Execute] to delete the blurry image.
„ Tap [Cancel] to save all images.
00214 00214 00214
Execute Cancel