Transmission methods for scan to e-mail, Transmission methods for scan to, E-mail – Sony AR-208S User Manual
Page 251

- 18 -
USING THE NETWORK SCANNER FUNCTION
2
TRANSMISSION METHODS FOR SCAN TO E-MAIL
The e-mail address for a Scan to E-mail transmission can be entered manually or selected from e-mail addresses
stored on an LDAP server.
Sending an image by entering an e-mail address manually
1
Press the [MODE SELECT] key to
select scanner mode.
The "SCAN" indicator
lights up to indicate that
scanner mode is
selected.
2
Place the original in the document
feeder tray or on the document glass.
For information on how to place the original, see
"
IMAGE ORIENTATION AND STANDARD
3
Select "INPUT ADDRESS" and press
the [ENTER] key.
If "INPUT ADDRESS"
does not appear, make
sure that "Scan to ad-hoc
E-mail" is enabled in the
Web page (
4
Enter the destination e-mail address
and press the [ENTER] key.
To enter characters, see
"
5
Press the [
] key (
) or [
] key
(
) to select the original size and
then press the [ENTER] key.
The original size
changes as follows each
time the [
] key (
)
or [
] key (
) is
pressed:
"8.5x11"
→"8.5x5.5"
→"A4"→"B5"→"A5"
→"8.5x14"→"8.5x13".
6
Press the [START] key (
) to begin
scanning.
SCAN USING:
INPUT ADDRESS
The original is scanned using the settings of
the scan mode that has the "Default Scan
Mode" checkbox selected.
INPUT ADDRESS
[email protected]
ORIG. SIZE ENTER
8.5X11
Note