Sennheiser Tourguide Wireless Transmitter SR 2020 D - Manual (Page 16)

14
Operating the SR 2020 D
Operating the SR 2020 D
Switching the transmitter on/off
To switch the transmitter on:
̈
Press the ON button
²
.
The display panel indicates the device name and then
switches to the standard display.
To switch the transmitter off:
̈
Press the ON button
²
until “ OFF ” appears on the display.
̈
Release the ON button
²
.
The display panel goes off and the transmitter switches off.
Note:
The transmitter can only be switched off when the standard
display is shown on the display panel. When in the operating
menu, the
ON button
² serves as the ESC (cancel) key, i.e.
you cancel your entry and return to the standard display.
Working with the operating menu
By way of example of the “ Chan. mode ” menu ( Channel mode ),
this section describes how to use the operating menu.
For an overview of the operating menu, please see page 22.
̈
Make sure that the lock mode is deactivated (see page 20).
Getting into the operating menu
To get from the standard display into the operating menu:
̈
Press the SET button
´
.
The “ Channel ” menu is highlighted with a black bar.
²
´