Setting up – Smeg CV35XS5 User Manual
Page 7
6
GB
Do not tilt the upright more than 7 degrees
to avoid damaging the floor
Setting up
It is important that the appliance be
absolutely level. To level the appliance,
remove the kick plate below the door and
screw the adjustable feet up or down (figs 8
and 9). If necessary, it is possible to adjust
the rear feet before the upright is installed.
Use a spirit level to check that the appliance
is absolutely level.
If the appliance is to be placed on a soft
surface, e.g. floorboards or a carpet, it is
best to recheck whether the appliance is still
level after a period of time as the underlying
surface may give under the weight of the
appliance.
fig. 8
fig. 9
>7º
<7º
fig. 10
fig. 11