Smeg CV35XS5 - Manual (Page 13)

13
GB
Fault finding
Fault Possible cause Remedy
The control lamp is
not lit.
Power failure; the fuse is blown;
the appliance is not plugged in
correctly.
Check that power is connected.
Reset the fuse.
Vibration or
bothersome noise.
The appliance is not level.
The appliance is resting against
other kitchen elements.
Level the appliance using a spirit
level.
Move the appliance away from
the kitchen elements or appli-
ances it is in contact with.
Compressor runs
continuously.
Temperature setting too low.
High room temperature.
Raise the temperature setting.
Ensure adequate ventilation.
Temperature in
freezer too high.
Temperature setting too high.
The quantity of fresh items
placed in the freezer at a time is
greater than the capacity of the
appliance.
Lower the temperature setting.
Wait a few hours and then re-
check the temperature.