Sears BT400 - Manual (Page 2)

2
TABLE OF CONTENTS
WARRANTY
INTRODUCTION
FULL 2 YEAR WARRANTY ON
BENCHTOP
®
VARIABLE SPEED JIG SAW
If this BENCHTOP
®
Jig Saw is found to be defective in
materials or workmanship within 2 years from the date of purchase,
Kmart will replace the tool, free of charge.
WARRANTY REPLACEMENT IS AVAILABLE BY RETURNING
THE TOOL TO THE NEAREST KMART STORE ALONG WITH RECEIPT
SHOWING DATE OF PURCHASE.
This warranty does not include damage/defects caused by or resulting from
abuse, accidents, alterations or commercial use. It also does not cover
accessories. This warranty does give you specific legal rights, and you
may also have other rights which vary from state to state.
Kmart Corporation, 3100 Big Beaver Road, Troy, Michigan 48084
• Warranty / Introduction / Tool Specifications ..............................................................................2
• General Safety Rules ..............................................................................................................3-6
• Additional Safety Rules ..............................................................................................................6
• Assembly/Set-Up ........................................................................................................................7
• Operating Instructions ............................................................................................................8-9
• Accessories ................................................................................................................................9
• Maintenance ..............................................................................................................................9
Your Jig Saw has many features that will make your job faster and easier.
Safety, performance and dependability have been given top priority in the
design of this tool, making it easy to maintain and operate.
Bevel Capacity 45 degrees
Strokes per Minute 800-3,200 SPM
Voltage 120 Volts
Cutting Stroke 11/16"
SPECIFICATIONS:
For repair / replacement parts after warranty has expired, call: 1-800-544-6986
CAUTION: Carefully read
through the entire manual before
attempting to use this tool. Be sure to
pay special attention to the Warnings
and Cautions on page 6 in this
manual. If you use the tool properly
and only for the operations for which
it was intended, you can enjoy years
of safe, dependable service from it.
389997 -00/BT400 Jig Saw 11/3/03 2:48 PM Page 2