Sony DVP-NS415 - Manual (Page 22)

22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
◆Recommended surround sound effects for
the
connection only
• TVS STANDARD (page 46)
z Hint
In connection , you can use the supplied
audio/video cord instead of using a separate audio
cord.
B
B-1
B-2
PCM/DTS/MPEG/
DOLBY DIGITAL S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL R-AUDIO-L VIDEO
DIGITAL OUT LINE OUT
CR
CB
Y
OPTICAL
B-2 B-1
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
R-AUDIO-L VIDEO
LINE OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Coaxial digital
cord (not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
or
l : Signal flow
to LINE OUT L/R (AUDIO) to DIGITAL OUT
(COAXIAL or OPTICAL)
B-1
B-1