Care of your steam mop – Shark S3501WC User Manual
Page 8

8
TOLL FREE:
1-866-538-6109
9
www.sharkclean.com
English
Care of Your Steam Mop
2
Remove the micro-fiber cleaning 
pocket by releasing the quick 
fasteners and using the lavender 
loop on the side of the pocket, 
avoiding contact with the hot pocket 
or dirt. Then empty the water tank. 
IMPORTANT: Be very careful 
because the cleaning pockets can 
get very hot from the steam, so use 
caution when removing them. Let 
the unit cool 2-3 minutes. 
3
To store the Shark
®
Steam Mop
hanging up; first remove the head 
(after it has cooled and the steam 
has been released) then hang on a 
large hook.
NOTE: If you want to store it 
standing upright then make sure 
it’s leaning against a wall for added 
support and safety. Always store 
your Steam Mop with the micro-fiber 
pocket removed, away from children 
or high traffic areas.
AFTER USE AND STORAGE
1
When you have finished using the
steam mop, and your floors are clean, 
unplug the cord from the outlet and 
move it into an upright position. Let 
the unit cool 2-3 minutes and release 
steam by pumping the handle several 
times before removing the micro-
fiber cleaning pocket from the mop 
head. 
1
2
3
KEEPING YOUR MICRO-FIBER
CLEANING POCKET AS GOOD 
AS NEW
1
We recommend washing your micro-
fiber pockets separately from other 
fabrics to avoid picking up lint. 
Only use liquid detergent. 
(no powder detergent) Don’t use 
any fabric softeners or bleach. 
Line dry or dry on a low dryer 
setting.
2
If there are loose threads on the
pocket carefully cut the thread with 
scissors. Don’t pull on them or cut at 
the base.
1
2
S3501WC_IB_English_100119.indd 8-9
1/19/10 2:48 PM
