Sony DVP-NS700P - Manual (Page 23)

Hook
ups
23
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 24.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
x Recommended surround sound effects using this connection with your
amplifier (receiver)
N Dolby Surround (Pro Logic) (page 79)
z For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
3 to 6 speakers
C
C-1
C-2
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2 PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P B
P R
LINE OUT OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
R– AUDIO 1 – L
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
C-2 C-1
CD/DVD player
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l : Signal flow
Dolby Surround amplifier (receiver)
Center
Rear *
(mono)
[Speakers]
or
Coaxial digital cord
(not supplied)
Stereo audio
cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to coaxial or optical digital input to audio input
(red) (white)
Rear
(L)
[Speakers]
(white)
(red)
continued